Horizontal Type Sand Mill

Applications：

Paints, Inks, Pigments, Foodstuff, Dyestuffs, Cosmetic, Electric industry...etc mid-viscosity liquid grinding.

Characteristics：

• Since 1978 the first creation of bead mill till now, the improvement is continuously from hardness of chamber, grinding disc, transmission system, outlet gap, mechanical seal, jacket cooling system, grinding medium...etc. Those improved to make our bead mill have 3-5 times bigger output capacity, less particle size, 3-5 times more longer using life, better finished quality than others horizontal bead mill suppliers.
• The grinding quality are based on particle size and metal pollution while grinding. The particle size is relied the design of grinding disc, transmission system and grinding medium beads. The metal pollution is caused by weak inner layer of chamber and weak grinding disc, it is also caused by beads. If the chamber inner layer, grinding disc and beads are weak, the hardness is not enough to stand the beating by each other, then, the metal material easy to wear and pollute the raw material while grinding, and it will poor the finished quality. Because our horizontal bead mill has enough hardness in chamber inner layer and grinding disc, so, it can stand the high speed beating with beads and get the less particle size but without metal pollution. Therefore, our horizontal bead mill has absolute better grinding quality than other suppliers.
• Chamber raw material: Outer layer made of #304SS. Inner layer made of abrasion-resistant and corrosion-resistant chrome steel, the hardness HRC63°. Disc made of abrasion-resistant and corrosion-resistant SKD 11 alloy steel, the hardness HRC 65°. Those hardness will not cause the metal pollution to poor the quality of finished product.
• Particular design of cartridge mechanical seal to protect the mechanical seal as longer using life. Superior design of grinding disc and transmission system to let particle size under 5 microns easily in short time.
• Available for Quartz-glass bead, Zirconia bead, Chrome steel bead, bead size 1-3mm dia. Available for product's viscosity under 8000cps.
• Circulative production, easy to operate, fix, clean and maintain.
• Specialized design of jacket cooling system for protecting the raw materials while grinding. Chilling water about 10°C.
• Diaphragms type 3 setting points Pressure Gauge - It controls the inner operating pressure of grinding chamber. When pressure over the high setting point, the feeding pump will stop sending the substances automatically. When pressure low down under this high setting point, the feeding pump will start automatically to send the substances.
• Whirling light type Alarm When machine has running in over load situation, the machine will stop automatically, and whirling light Alarm will flash and whirl. The buzzing sound will come from Alarm for warning.
• Design the slipping track under the grinding chamber for available in changing beads and maintaining job. Design the machine with four wheels for easily moving.
• Closed type of chamber, the solvent will not evaporate while grinding in chamber. It will reduce the air pollution and care the health, also save the cost.
• Outlet pipe configures thermometer, can see the product's temperature.
• HL Type:
  Gear pump with reducer and inverter to adjust the pumping speed, 
  also adjust the flowing rate.
• HAL Type:
  Air diaphragm pump. To utilize the air pressure which from air compressor to control the pumping speed of Diaphragm pump, this pumping speedy rate can control the flowing speed rate and the flowing capacity of raw materials.

Vertical Type Bead Mill

Applications：

Paints, Inks, Pigments, Foodstuff, Dyestuffs, Cosmetic, Electric industry... etc mid - viscosity liquid grinding.

Characteristics：

• Since 1978 the first creation of bead mill till now, we improved a lots from designing structure and raw materials to upgrade our bead mill to match the high-level request from customers. The improvement is continuously from hardness of chamber inner layer and grinding disc, transmission system, outlet gap, mechanical seal, jacket cooling system, grinding medium... etc. Those improved to make our bead mill have bigger output capacity, less particle size, more longer using life, better finished quality than others bead mill suppliers.
• The vertical design is feeding the raw material into chamber bottom and out from upper part of the chamber. Owing to its specific gravity, the grinding beads will move down to form a better circulation. This will force raw materials in a very narrow space and been impacted by high speed accelerated beads. This up and down convection plus the high speed circulation by disc, the beads will knead, disperse, emulsify completely in the pressured chamber. This additional function of up & down convection will cut short the grinding time to reach the request of particle size which under 5 microns, of course, it will have more output producing capacity than horizontal bead mill. In general, Vertical bead mill will have more output producing capacity about 40-50% than horizontal bead mill which compare by the same model size.
• The difference of designing structure between vertical bead mill and horizontal bead mill, The vertical bead mill designs the motor and driving transmission on the above of grinding chamber, the pumping system will pump the raw materials out from chamber outlet gap, so, the raw materials will not touch the part of motor and driving transmission. This divided design will let motor and driving transmission has more longer using life than horizontal bead mill.
• Closed type of chamber, the solvent will not evaporate while grinding in chamber. It will reduce the air pollution and care the health, also save the cost.
• Chamber raw material: Outer layer made of #304 SS. Inner layer made of abrasion-resistant and corrosion-resistant chrome steel, the hardness HRC 63°. Disc made of abrasion-resistant and corrosion-resistant SKD 11 alloy steel, the hardness HRC 65°. Those hardness will not cause the metal pollution to poor the quality of finished product Superior design of grinding disc and transmission system to let particle size under 5 microns easily in short time.
• Available for Quartz-glass bead, Zirconia bead, Chrome steel bead, bead size 1-3mm dia.
• Available for product's viscosity under 8000cps.
• Circulative production, easy to operate.
• Specialized design of jacket cooling system for protecting the raw materials while grinding. Chilling water about 10°C.
• KL Type:
  Gear pump with reducer and inverter to adjust the pumping speed, 
  also adjust the flowing rate.
  
  AL Type:
  Air diaphragm pump. To utilize the air pressure which from air compressor to control the pumping speed of Diaphragm pump, this pumping speedy rate can control the flowing speed rate and the flowing capacity of raw materials.